Internet Engineering Task Force (IETF)
Request for Comments: 7719
Category: Informational
ISSN: 2070-1721
P. Hoffman
ICANN
A. Sullivan
Dyn
K. Fujiwara
JPRS
December 2015

DNS Terminology

Abstract

The DNS is defined in literally dozens of different RFCs. The terminology used by implementers and developers of DNS protocols, and by operators of DNS systems, has sometimes changed in the decades since the DNS was first defined. This document gives current definitions for many of the terms used in the DNS in a single document.

Status of This Memo

This document is not an Internet Standards Track specification; it is published for informational purposes.

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 5741.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7719.

Copyright Notice

Copyright © 2015 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Names . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  DNS Header and Response Codes . . . . . . . . . . . . . . . .   6
   4.  Resource Records  . . . . . . . . . . . . . . . . . . . . . .   7
   5.  DNS Servers and Clients . . . . . . . . . . . . . . . . . . .   9
   6.  Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
   7.  Registration Model  . . . . . . . . . . . . . . . . . . . . .  17
   8.  General DNSSEC  . . . . . . . . . . . . . . . . . . . . . . .  18
   9.  DNSSEC States . . . . . . . . . . . . . . . . . . . . . . . .  20
   10. Security Considerations . . . . . . . . . . . . . . . . . . .  22
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  22
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  22
     11.2.  Informative References . . . . . . . . . . . . . . . . .  24
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  27
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  27

1. Introduction

The Domain Name System (DNS) is a simple query-response protocol whose messages in both directions have the same format. The protocol and message format are defined in [RFC1034] and [RFC1035]. These RFCs defined some terms, but later documents defined others. Some of the terms from RFCs 1034 and 1035 now have somewhat different meanings than they did in 1987.

This document collects a wide variety of DNS-related terms. Some of them have been precisely defined in earlier RFCs, some have been loosely defined in earlier RFCs, and some are not defined in any earlier RFC at all.

Most of the definitions here are the consensus definition of the DNS community -- both protocol developers and operators. Some of the definitions differ from earlier RFCs, and those differences are noted. In this document, where the consensus definition is the same as the one in an RFC, that RFC is quoted. Where the consensus definition has changed somewhat, the RFC is mentioned but the new stand-alone definition is given.

It is important to note that, during the development of this document, it became clear that some DNS-related terms are interpreted quite differently by different DNS experts. Further, some terms that are defined in early DNS RFCs now have definitions that are generally agreed to, but that are different from the original definitions. Therefore, the authors intend to follow this document with a substantial revision in the not-distant future. That revision will probably have more in-depth discussion of some terms as well as new terms; it will also update some of the RFCs with new definitions.

The terms are organized loosely by topic. Some definitions are for new terms for things that are commonly talked about in the DNS community but that never had terms defined for them.

   Other organizations sometimes define DNS-related terms their own way.
   For example, the W3C defines "domain" at
   https://specs.webplatform.org/url/webspecs/develop/.

Note that there is no single consistent definition of "the DNS". It can be considered to be some combination of the following: a commonly used naming scheme for objects on the Internet; a distributed database representing the names and certain properties of these objects; an architecture providing distributed maintenance, resilience, and loose coherency for this database; and a simple query-response protocol (as mentioned below) implementing this architecture.

Capitalization in DNS terms is often inconsistent among RFCs and various DNS practitioners. The capitalization used in this document is a best guess at current practices, and is not meant to indicate that other capitalization styles are wrong or archaic. In some cases, multiple styles of capitalization are used for the same term due to quoting from different RFCs.

2. Names

   Domain name:  Section 3.1 of [RFC1034] talks of "the domain name
   
      space" as a tree structure.  "Each node has a label, which is zero
      to 63 octets in length. ... The domain name of a node is the list
      of the labels on the path from the node to the root of the tree.
      ... To simplify implementations, the total number of octets that
      represent a domain name (i.e., the sum of all label octets and
      label lengths) is limited to 255."  Any label in a domain name can
      contain any octet value.
   
   Fully qualified domain name (FQDN):  This is often just a clear way
      of saying the same thing as "domain name of a node", as outlined
      above.  However, the term is ambiguous.  Strictly speaking, a
      fully qualified domain name would include every label, including
      the final, zero-length label of the root: such a name would be
      written "www.example.net." (note the terminating dot).  But
      because every name eventually shares the common root, names are
      often written relative to the root (such as "www.example.net") and
      are still called "fully qualified".  This term first appeared in
      [RFC819].  In this document, names are often written relative to
      the root.

The need for the term "fully qualified domain name" comes from the existence of partially qualified domain names, which are names where some of the right-most names are left off and are understood only by context.

   Label:  The identifier of an individual node in the sequence of nodes
      identified by a fully qualified domain name.
   
   Host name:  This term and its equivalent, "hostname", have been
      widely used but are not defined in [RFC1034], [RFC1035],
      [RFC1123], or [RFC2181].  The DNS was originally deployed into the
      Host Tables environment as outlined in [RFC952], and it is likely
      that the term followed informally from the definition there.  Over
      time, the definition seems to have shifted.  "Host name" is often
      meant to be a domain name that follows the rules in Section 3.5 of
      [RFC1034], the "preferred name syntax".  Note that any label in a
      domain name can contain any octet value; hostnames are generally
      considered to be domain names where every label follows the rules
      in the "preferred name syntax", with the amendment that labels can
      start with ASCII digits (this amendment comes from Section 2.1 of
      [RFC1123]).

People also sometimes use the term hostname to refer to just the first label of an FQDN, such as "printer" in "printer.admin.example.com". (Sometimes this is formalized in configuration in operating systems.) In addition, people sometimes use this term to describe any name that refers to a machine, and those might include labels that do not conform to the "preferred name syntax".

   TLD:  A Top-Level Domain, meaning a zone that is one layer below the
      root, such as "com" or "jp".  There is nothing special, from the
      point of view of the DNS, about TLDs.  Most of them are also
      delegation-centric zones, and there are significant policy issues
      around their operation.  TLDs are often divided into sub-groups
      such as Country Code Top-Level Domains (ccTLDs), Generic Top-Level
      Domains (gTLDs), and others; the division is a matter of policy,
      and beyond the scope of this document.
   
   IDN:  The common abbreviation for "Internationalized Domain Name".
      The IDNA protocol is the standard mechanism for handling domain
      names with non-ASCII characters in applications in the DNS.  The
      current standard, normally called "IDNA2008", is defined in
      [RFC5890], [RFC5891], [RFC5892], [RFC5893], and [RFC5894].  These
      documents define many IDN-specific terms such as "LDH label",
      "A-label", and "U-label".  [RFC6365] defines more terms that
      relate to internationalization (some of which relate to IDNs), and
      [RFC6055] has a much more extensive discussion of IDNs, including
      some new terminology.
   
   Subdomain:  "A domain is a subdomain of another domain if it is
      contained within that domain.  This relationship can be tested by
      seeing if the subdomain's name ends with the containing domain's
      name."  (Quoted from [RFC1034], Section 3.1).  For example, in the
      host name "nnn.mmm.example.com", both "mmm.example.com" and
      "nnn.mmm.example.com" are subdomains of "example.com".
   
   Alias:  The owner of a CNAME resource record, or a subdomain of the
      owner of a DNAME resource record [RFC6672].  See also "canonical
      name".
   
   Canonical name:  A CNAME resource record "identifies its owner name
      as an alias, and specifies the corresponding canonical name in the
      RDATA section of the RR."  (Quoted from [RFC1034], Section 3.6.2)
      This usage of the word "canonical" is related to the mathematical
      concept of "canonical form".
   
   CNAME:  "It is traditional to refer to the owner of a CNAME record as
      'a CNAME'.  This is unfortunate, as 'CNAME' is an abbreviation of
      'canonical name', and the owner of a CNAME record is an alias, not
      a canonical name."  (Quoted from [RFC2181], Section 10.1.1)
   
   Public suffix:  "A domain that is controlled by a public registry."
      (Quoted from [RFC6265], Section 5.3) A common definition for this
      term is a domain under which subdomains can be registered, and on
      which HTTP cookies ([RFC6265]) should not be set.  There is no
      indication in a domain name whether it is a public suffix; that
      can only be determined by outside means.  In fact, both a domain
      and a subdomain of that domain can be public suffixes.  At the
      time this document is published, the IETF DBOUND Working Group
      [DBOUND] is dealing with issues concerning public suffixes.

There is nothing inherent in a domain name to indicate whether it is a public suffix. One resource for identifying public suffixes is the Public Suffix List (PSL) maintained by Mozilla (http://publicsuffix.org/).

For example, at the time this document is published, the "com.au" domain is listed as a public suffix in the PSL. (Note that this example might change in the future.)

Note that the term "public suffix" is controversial in the DNS community for many reasons, and may be significantly changed in the future. One example of the difficulty of calling a domain a public suffix is that designation can change over time as the registration policy for the zone changes, such as the case of the "uk" TLD around the time this document is published.

3. DNS Header and Response Codes

The header of a DNS message is its first 12 octets. Many of the fields and flags in the header diagram in Sections 4.1.1 through 4.1.3 of [RFC1035] are referred to by their names in that diagram. For example, the response codes are called "RCODEs", the data for a record is called the "RDATA", and the authoritative answer bit is often called "the AA flag" or "the AA bit".

Some of response codes that are defined in [RFC1035] have gotten their own shorthand names. Some common response code names that appear without reference to the numeric value are "FORMERR", "SERVFAIL", and "NXDOMAIN" (the latter of which is also referred to as "Name Error"). All of the RCODEs are listed at http://www.iana.org/assignments/dns-parameters, although that site uses mixed-case capitalization, while most documents use all-caps.

   NODATA:  "A pseudo RCODE which indicates that the name is valid for
      the given class, but there are no records of the given type.  A
      NODATA response has to be inferred from the answer."  (Quoted from
      [RFC2308], Section 1.)  "NODATA is indicated by an answer with the
      RCODE set to NOERROR and no relevant answers in the answer

section. The authority section will contain an SOA record, or there will be no NS records there." (Quoted from [RFC2308], Section 2.2.) Note that referrals have a similar format to NODATA replies; [RFC2308] explains how to distinguish them.

The term "NXRRSET" is sometimes used as a synonym for NODATA. However, this is a mistake, given that NXRRSET is a specific error code defined in [RFC2136].

   Negative response:  A response that indicates that a particular RRset
      does not exist, or whose RCODE indicates the nameserver cannot
      answer.  Sections 2 and 7 of [RFC2308] describe the types of
      negative responses in detail.
   
   Referrals:  Data from the authority section of a non-authoritative
      answer.  [RFC1035] Section 2.1 defines "authoritative" data.
      However, referrals at zone cuts (defined in Section 6) are not
      authoritative.  Referrals may be zone cut NS resource records and
      their glue records.  NS records on the parent side of a zone cut
      are an authoritative delegation, but are normally not treated as
      authoritative data.  In general, a referral is a way for a server
      to send an answer saying that the server does not know the answer,
      but knows where the query should be directed in order to get an
      answer.  Historically, many authoritative servers answered with a
      referral to the root zone when queried for a name for which they
      were not authoritative, but this practice has declined.

4. Resource Records

   RR:  An acronym for resource record.  ([RFC1034], Section 3.6.)
   
   RRset:  A set of resource records with the same label, class and
      type, but with different data.  (Definition from [RFC2181]) Also
      spelled RRSet in some documents.  As a clarification, "same label"
      in this definition means "same owner name".  In addition,
      [RFC2181] states that "the TTLs of all RRs in an RRSet must be the
      same".  (This definition is definitely not the same as "the
      response one gets to a query for QTYPE=ANY", which is an
      unfortunate misunderstanding.)
   
   EDNS:  The extension mechanisms for DNS, defined in [RFC6891].
      Sometimes called "EDNS0" or "EDNS(0)" to indicate the version
      number.  EDNS allows DNS clients and servers to specify message
      sizes larger than the original 512 octet limit, to expand the
      response code space, and potentially to carry additional options
      that affect the handling of a DNS query.
   
   OPT:  A pseudo-RR (sometimes called a "meta-RR") that is used only to
      contain control information pertaining to the question-and-answer
      sequence of a specific transaction.  (Definition from [RFC6891],
      Section 6.1.1) It is used by EDNS.
   
   Owner:  The domain name where a RR is found ([RFC1034], Section 3.6).
      Often appears in the term "owner name".
   
   SOA field names:  DNS documents, including the definitions here,
      often refer to the fields in the RDATA of an SOA resource record
      by field name.  Those fields are defined in Section 3.3.13 of
      [RFC1035].  The names (in the order they appear in the SOA RDATA)
      are MNAME, RNAME, SERIAL, REFRESH, RETRY, EXPIRE, and MINIMUM.
      Note that the meaning of MINIMUM field is updated in Section 4 of
      [RFC2308]; the new definition is that the MINIMUM field is only
      "the TTL to be used for negative responses".  This document tends
      to use field names instead of terms that describe the fields.
   
   TTL:  The maximum "time to live" of a resource record.  "A TTL value
      is an unsigned number, with a minimum value of 0, and a maximum
      value of 2147483647.  That is, a maximum of 2^31 - 1.  When
      transmitted, the TTL is encoded in the less significant 31 bits of
      the 32 bit TTL field, with the most significant, or sign, bit set
      to zero."  (Quoted from [RFC2181], Section 8) (Note that [RFC1035]
      erroneously stated that this is a signed integer; that was fixed
      by [RFC2181].)

The TTL "specifies the time interval that the resource record may be cached before the source of the information should again be consulted". (Quoted from [RFC1035], Section 3.2.1) Also: "the time interval (in seconds) that the resource record may be cached before it should be discarded". (Quoted from [RFC1035], Section 4.1.3). Despite being defined for a resource record, the TTL of every resource record in an RRset is required to be the same ([RFC2181], Section 5.2).

The reason that the TTL is the maximum time to live is that a cache operator might decide to shorten the time to live for operational purposes, such as if there is a policy to disallow TTL values over a certain number. Also, if a value is flushed from the cache when its value is still positive, the value effectively becomes zero. Some servers are known to ignore the TTL on some RRsets (such as when the authoritative data has a very short TTL) even though this is against the advice in RFC 1035.

There is also the concept of a "default TTL" for a zone, which can be a configuration parameter in the server software. This is often expressed by a default for the entire server, and a default for a zone using the $TTL directive in a zone file. The $TTL directive was added to the master file format by [RFC2308].

   Class independent:  A resource record type whose syntax and semantics
      are the same for every DNS class.  A resource record type that is
      not class independent has different meanings depending on the DNS
      class of the record, or the meaning is undefined for classes other
      than IN (class 1, the Internet).

5. DNS Servers and Clients

This section defines the terms used for the systems that act as DNS clients, DNS servers, or both.

   Resolver:  A program "that extract[s] information from name servers
      in response to client requests."  (Quoted from [RFC1034],
      Section 2.4) "The resolver is located on the same machine as the
      program that requests the resolver's services, but it may need to
      consult name servers on other hosts."  (Quoted from [RFC1034],
      Section 5.1) A resolver performs queries for a name, type, and
      class, and receives answers.  The logical function is called
      "resolution".  In practice, the term is usually referring to some
      specific type of resolver (some of which are defined below), and
      understanding the use of the term depends on understanding the
      context.
   
   Stub resolver:  A resolver that cannot perform all resolution itself.
      Stub resolvers generally depend on a recursive resolver to
      undertake the actual resolution function.  Stub resolvers are
      discussed but never fully defined in Section 5.3.1 of [RFC1034].
      They are fully defined in Section 6.1.3.1 of [RFC1123].
   
   Iterative mode:  A resolution mode of a server that receives DNS
      queries and responds with a referral to another server.
      Section 2.3 of [RFC1034] describes this as "The server refers the
      client to another server and lets the client pursue the query".  A
      resolver that works in iterative mode is sometimes called an
      "iterative resolver".
   
   Recursive mode:  A resolution mode of a server that receives DNS
      queries and either responds to those queries from a local cache or
      sends queries to other servers in order to get the final answers
      to the original queries.  Section 2.3 of [RFC1034] describes this
      as "The first server pursues the query for the client at another
      server".  A server operating in recursive mode may be thought of

as having a name server side (which is what answers the query) and a resolver side (which performs the resolution function). Systems operating in this mode are commonly called "recursive servers". Sometimes they are called "recursive resolvers". While strictly the difference between these is that one of them sends queries to another recursive server and the other does not, in practice it is not possible to know in advance whether the server that one is querying will also perform recursion; both terms can be observed in use interchangeably.

   Full resolver:  This term is used in [RFC1035], but it is not defined
      there.  RFC 1123 defines a "full-service resolver" that may or may
      not be what was intended by "full resolver" in [RFC1035].  This
      term is not properly defined in any RFC.
   
   Full-service resolver:  Section 6.1.3.1 of [RFC1123] defines this
      term to mean a resolver that acts in recursive mode with a cache
      (and meets other requirements).
   
   Priming:  The mechanism used by a resolver to determine where to send
      queries before there is anything in the resolver's cache.  Priming
      is most often done from a configuration setting that contains a
      list of authoritative servers for the root zone.
   
   Negative caching:  "The storage of knowledge that something does not
      exist, cannot give an answer, or does not give an answer."
      (Quoted from [RFC2308], Section 1)
   
   Authoritative server:  "A server that knows the content of a DNS zone
      from local knowledge, and thus can answer queries about that zone
      without needing to query other servers."  (Quoted from [RFC2182],
      Section 2.)  It is a system that responds to DNS queries with
      information about zones for which it has been configured to answer
      with the AA flag in the response header set to 1.  It is a server
      that has authority over one or more DNS zones.  Note that it is
      possible for an authoritative server to respond to a query without
      the parent zone delegating authority to that server.
      Authoritative servers also provide "referrals", usually to child
      zones delegated from them; these referrals have the AA bit set to
      0 and come with referral data in the Authority and (if needed) the
      Additional sections.
   
   Authoritative-only server:  A name server that only serves
      authoritative data and ignores requests for recursion.  It will
      "not normally generate any queries of its own.  Instead, it
      answers non-recursive queries from iterative resolvers looking for
      information in zones it serves."  (Quoted from [RFC4697],
      Section 2.4)
   
   Zone transfer:  The act of a client requesting a copy of a zone and
      an authoritative server sending the needed information.  (See
      Section 6 for a description of zones.)  There are two common
      standard ways to do zone transfers: the AXFR ("Authoritative
      Transfer") mechanism to copy the full zone (described in
      [RFC5936], and the IXFR ("Incremental Transfer") mechanism to copy
      only parts of the zone that have changed (described in [RFC1995]).
      Many systems use non-standard methods for zone transfer outside
      the DNS protocol.
   
   Secondary server:  "An authoritative server which uses zone transfer
      to retrieve the zone" (Quoted from [RFC1996], Section 2.1).
      [RFC2182] describes secondary servers in detail.  Although early
      DNS RFCs such as [RFC1996] referred to this as a "slave", the
      current common usage has shifted to calling it a "secondary".
      Secondary servers are also discussed in [RFC1034].
   
   Slave server:  See secondary server.
   
   Primary server:  "Any authoritative server configured to be the
      source of zone transfer for one or more [secondary] servers"
      (Quoted from [RFC1996], Section 2.1) or, more specifically, "an
      authoritative server configured to be the source of AXFR or IXFR
      data for one or more [secondary] servers" (Quoted from [RFC2136]).
      Although early DNS RFCs such as [RFC1996] referred to this as a
      "master", the current common usage has shifted to "primary".
      Primary servers are also discussed in [RFC1034].
   
   Master server:  See primary server.
   
   Primary master:  "The primary master is named in the zone's SOA MNAME
      field and optionally by an NS RR".  (Quoted from [RFC1996],
      Section 2.1).  [RFC2136] defines "primary master" as "Master
      server at the root of the AXFR/IXFR dependency graph.  The primary
      master is named in the zone's SOA MNAME field and optionally by an
      NS RR.  There is by definition only one primary master server per
      zone."  The idea of a primary master is only used by [RFC2136],
      and is considered archaic in other parts of the DNS.
   
   Stealth server:  This is "like a slave server except not listed in an
      NS RR for the zone."  (Quoted from [RFC1996], Section 2.1)
   
   Hidden master:  A stealth server that is a master for zone transfers.
      "In this arrangement, the master name server that processes the
      updates is unavailable to general hosts on the Internet; it is not
      listed in the NS RRset."  (Quoted from [RFC6781], Section 3.4.3.)
      An earlier RFC, [RFC4641], said that the hidden master's name
      appears in the SOA RRs MNAME field, although in some setups, the
      name does not appear at all in the public DNS.  A hidden master
      can be either a secondary or a primary master.
   
   Forwarding:  The process of one server sending a DNS query with the
      RD bit set to 1 to another server to resolve that query.
      Forwarding is a function of a DNS resolver; it is different than
      simply blindly relaying queries.

[RFC5625] does not give a specific definition for forwarding, but describes in detail what features a system that forwards need to support. Systems that forward are sometimes called "DNS proxies", but that term has not yet been defined (even in [RFC5625]).

   Forwarder:  Section 1 of [RFC2308] describes a forwarder as "a
      nameserver used to resolve queries instead of directly using the
      authoritative nameserver chain".  [RFC2308] further says "The
      forwarder typically either has better access to the internet, or
      maintains a bigger cache which may be shared amongst many
      resolvers."  That definition appears to suggest that forwarders
      normally only query authoritative servers.  In current use,
      however, forwarders often stand between stub resolvers and
      recursive servers.  [RFC2308] is silent on whether a forwarder is
      iterative-only or can be a full-service resolver.
   
   Policy-implementing resolver:  A resolver acting in recursive mode
      that changes some of the answers that it returns based on policy
      criteria, such as to prevent access to malware sites or
      objectionable content.  In general, a stub resolver has no idea
      whether upstream resolvers implement such policy or, if they do,
      the exact policy about what changes will be made.  In some cases,
      the user of the stub resolver has selected the policy-implementing
      resolver with the explicit intention of using it to implement the
      policies.  In other cases, policies are imposed without the user
      of the stub resolver being informed.
   
   Open resolver:  A full-service resolver that accepts and processes
      queries from any (or nearly any) stub resolver.  This is sometimes
      also called a "public resolver", although the term "public
      resolver" is used more with open resolvers that are meant to be
      open, as compared to the vast majority of open resolvers that are
      probably misconfigured to be open.
   
   View:  A configuration for a DNS server that allows it to provide
      different answers depending on attributes of the query.
      Typically, views differ by the source IP address of a query, but
      can also be based on the destination IP address, the type of query
      (such as AXFR), whether it is recursive, and so on.  Views are
      often used to provide more names or different addresses to queries
      from "inside" a protected network than to those "outside" that
      network.  Views are not a standardized part of the DNS, but they
      are widely implemented in server software.
   
   Passive DNS:  A mechanism to collect large amounts of DNS data by
      storing DNS responses from servers.  Some of these systems also
      collect the DNS queries associated with the responses; this can
      raise privacy issues.  Passive DNS databases can be used to answer
      historical questions about DNS zones such as which records were
      available for them at what times in the past.  Passive DNS
      databases allow searching of the stored records on keys other than
      just the name, such as "find all names which have A records of a
      particular value".
   
   Anycast:  "The practice of making a particular service address
      available in multiple, discrete, autonomous locations, such that
      datagrams sent are routed to one of several available locations."
      (Quoted from [RFC4786], Section 2)

6. Zones

This section defines terms that are used when discussing zones that are being served or retrieved.

   Zone:  "Authoritative information is organized into units called
      'zones', and these zones can be automatically distributed to the
      name servers which provide redundant service for the data in a
      zone."  (Quoted from [RFC1034], Section 2.4)
   
   Child:  "The entity on record that has the delegation of the domain
      from the Parent."  (Quoted from [RFC7344], Section 1.1)
   
   Parent:  "The domain in which the Child is registered."  (Quoted from
      [RFC7344], Section 1.1) Earlier, "parent name server" was defined
      in [RFC882] as "the name server that has authority over the place
      in the domain name space that will hold the new domain".  (Note
      that [RFC882] was obsoleted by [RFC1034] and [RFC1035].)  [RFC819]
      also has some description of the relationship between parents and
      children.

Origin:

(a) "The domain name that appears at the top of a zone (just below the cut that separates the zone from its parent). The name of the zone is the same as the name of the domain at the zone's origin." (Quoted from [RFC2181], Section 6.) These days, this sense of "origin" and "apex" (defined below) are often used interchangeably.

(b) The domain name within which a given relative domain name appears in zone files. Generally seen in the context of "$ORIGIN", which is a control entry defined in [RFC1035], Section 5.1, as part of the master file format. For example, if the $ORIGIN is set to "example.org.", then a master file line for "www" is in fact an entry for "www.example.org.".

   Apex:  The point in the tree at an owner of an SOA and corresponding
      authoritative NS RRset.  This is also called the "zone apex".
      [RFC4033] defines it as "the name at the child's side of a zone
      cut".  The "apex" can usefully be thought of as a data-theoretic
      description of a tree structure, and "origin" is the name of the
      same concept when it is implemented in zone files.  The
      distinction is not always maintained in use, however, and one can
      find uses that conflict subtly with this definition.  [RFC1034]
      uses the term "top node of the zone" as a synonym of "apex", but
      that term is not widely used.  These days, the first sense of
      "origin" (above) and "apex" are often used interchangeably.
   
   Zone cut:  The delimitation point between two zones where the origin
      of one of the zones is the child of the other zone.

"Zones are delimited by 'zone cuts'. Each zone cut separates a 'child' zone (below the cut) from a 'parent' zone (above the cut). (Quoted from [RFC2181], Section 6; note that this is barely an ostensive definition.) Section 4.2 of [RFC1034] uses "cuts" as 'zone cut'."

   Delegation:  The process by which a separate zone is created in the
      name space beneath the apex of a given domain.  Delegation happens
      when an NS RRset is added in the parent zone for the child origin.
      Delegation inherently happens at a zone cut.  The term is also
      commonly a noun: the new zone that is created by the act of
      delegating.
   
   Glue records:  "[Resource records] which are not part of the
      authoritative data [of the zone], and are address resource records
      for the [name servers in subzones].  These RRs are only necessary
      if the name server's name is 'below' the cut, and are only used as
      part of a referral response."  Without glue "we could be faced
      with the situation where the NS RRs tell us that in order to learn
      a name server's address, we should contact the server using the
      address we wish to learn."  (Definition from [RFC1034],
      Section 4.2.1)

A later definition is that glue "includes any record in a zone file that is not properly part of that zone, including nameserver records of delegated sub-zones (NS records), address records that accompany those NS records (A, AAAA, etc), and any other stray data that might appear" ([RFC2181], Section 5.4.1). Although glue is sometimes used today with this wider definition in mind, the context surrounding the [RFC2181] definition suggests it is intended to apply to the use of glue within the document itself and not necessarily beyond.

In-bailiwick:

(a) An adjective to describe a name server whose name is either subordinate to or (rarely) the same as the zone origin. In- bailiwick name servers require glue records in their parent zone (using the first of the definitions of "glue records" in the definition above).

(b) Data for which the server is either authoritative, or else authoritative for an ancestor of the owner name. This sense of the term normally is used when discussing the relevancy of glue records in a response. For example, the server for the parent zone "example.com" might reply with glue records for "ns.child.example.com". Because the "child.example.com" zone is a descendant of the "example.com" zone, the glue records are in- bailiwick.

   Out-of-bailiwick:  The antonym of in-bailiwick.
   
   Authoritative data:  "All of the RRs attached to all of the nodes
      from the top node of the zone down to leaf nodes or nodes above
      cuts around the bottom edge of the zone."  (Quoted from [RFC1034],
      Section 4.2.1) It is noted that this definition might
      inadvertently also include any NS records that appear in the zone,
      even those that might not truly be authoritative because there are
      identical NS RRs below the zone cut.  This reveals the ambiguity

in the notion of authoritative data, because the parent-side NS records authoritatively indicate the delegation, even though they are not themselves authoritative data.

   Root zone:  The zone whose apex is the zero-length label.  Also
      sometimes called "the DNS root".
   
   Empty non-terminals:  "Domain names that own no resource records but
      have subdomains that do."  (Quoted from [RFC4592], Section 2.2.2.)
      A typical example is in SRV records: in the name
      "_sip._tcp.example.com", it is likely that "_tcp.example.com" has
      no RRsets, but that "_sip._tcp.example.com" has (at least) an SRV
      RRset.
   
   Delegation-centric zone:  A zone that consists mostly of delegations
      to child zones.  This term is used in contrast to a zone that
      might have some delegations to child zones, but also has many data
      resource records for the zone itself and/or for child zones.  The
      term is used in [RFC4956] and [RFC5155], but is not defined there.
   
   Wildcard:  [RFC1034] defined "wildcard", but in a way that turned out
      to be confusing to implementers.  Special treatment is given to
      RRs with owner names starting with the label "*".  "Such RRs are
      called 'wildcards'.  Wildcard RRs can be thought of as
      instructions for synthesizing RRs."  (Quoted from [RFC1034],
      Section 4.3.3) For an extended discussion of wildcards, including
      clearer definitions, see [RFC4592].
   
   Occluded name:  "The addition of a delegation point via dynamic
      update will render all subordinate domain names to be in a limbo,
      still part of the zone, but not available to the lookup process.
      The addition of a DNAME resource record has the same impact.  The
      subordinate names are said to be 'occluded'."  (Quoted from
      [RFC5936], Section 3.5)
   
   Fast flux DNS:  This "occurs when a domain is found in DNS using A
      records to multiple IP addresses, each of which has a very short
      Time-to-Live (TTL) value associated with it.  This means that the
      domain resolves to varying IP addresses over a short period of
      time."  (Quoted from [RFC6561], Section 1.1.5, with typo
      corrected) It is often used to deliver malware.  Because the
      addresses change so rapidly, it is difficult to ascertain all the
      hosts.  It should be noted that the technique also works with AAAA
      records, but such use is not frequently observed on the Internet
      as of this writing.

7. Registration Model

   Registry:  The administrative operation of a zone that allows
      registration of names within that zone.  People often use this
      term to refer only to those organizations that perform
      registration in large delegation-centric zones (such as TLDs); but
      formally, whoever decides what data goes into a zone is the
      registry for that zone.  This definition of "registry" is from a
      DNS point of view; for some zones, the policies that determine
      what can go in the zone are decided by superior zones and not the
      registry operator.
   
   Registrant:  An individual or organization on whose behalf a name in
      a zone is registered by the registry.  In many zones, the registry
      and the registrant may be the same entity, but in TLDs they often
      are not.
   
   Registrar:  A service provider that acts as a go-between for
      registrants and registries.  Not all registrations require a
      registrar, though it is common to have registrars involved in
      registrations in TLDs.
   
   EPP:  The Extensible Provisioning Protocol (EPP), which is commonly
      used for communication of registration information between
      registries and registrars.  EPP is defined in [RFC5730].
   
   WHOIS:  A protocol specified in [RFC3912], often used for querying
      registry databases.  WHOIS data is frequently used to associate
      registration data (such as zone management contacts) with domain
      names.  The term "WHOIS data" is often used as a synonym for the
      registry database, even though that database may be served by
      different protocols, particularly RDAP.  The WHOIS protocol is
      also used with IP address registry data.
   
   RDAP:  The Registration Data Access Protocol, defined in [RFC7480],
      [RFC7481], [RFC7482], [RFC7483], [RFC7484], and [RFC7485].  The
      RDAP protocol and data format are meant as a replacement for
      WHOIS.
   
   DNS operator:  An entity responsible for running DNS servers.  For a
      zone's authoritative servers, the registrant may act as their own
      DNS operator, or their registrar may do it on their behalf, or
      they may use a third-party operator.  For some zones, the registry
      function is performed by the DNS operator plus other entities who
      decide about the allowed contents of the zone.

8. General DNSSEC

Most DNSSEC terms are defined in [RFC4033], [RFC4034], [RFC4035], and [RFC5155]. The terms that have caused confusion in the DNS community are highlighted here.

   DNSSEC-aware and DNSSEC-unaware:  These two terms, which are used in
      some RFCs, have not been formally defined.  However, Section 2 of
      [RFC4033] defines many types of resolvers and validators,
      including "non-validating security-aware stub resolver", "non-
      validating stub resolver", "security-aware name server",
      "security-aware recursive name server", "security-aware resolver",
      "security-aware stub resolver", and "security-oblivious
      'anything'".  (Note that the term "validating resolver", which is
      used in some places in DNSSEC-related documents, is also not
      defined.)
   
   Signed zone:  "A zone whose RRsets are signed and that contains
      properly constructed DNSKEY, Resource Record Signature (RRSIG),
      Next Secure (NSEC), and (optionally) DS records."  (Quoted from
      [RFC4033], Section 2.)  It has been noted in other contexts that
      the zone itself is not really signed, but all the relevant RRsets
      in the zone are signed.  Nevertheless, if a zone that should be
      signed contains any RRsets that are not signed (or opted out),
      those RRsets will be treated as bogus, so the whole zone needs to
      be handled in some way.

It should also be noted that, since the publication of [RFC6840], NSEC records are no longer required for signed zones: a signed zone might include NSEC3 records instead. [RFC7129] provides additional background commentary and some context for the NSEC and NSEC3 mechanisms used by DNSSEC to provide authenticated denial- of-existence responses.

   Unsigned zone:  Section 2 of [RFC4033] defines this as "a zone that
      is not signed".  Section 2 of [RFC4035] defines this as "A zone
      that does not include these records [properly constructed DNSKEY,
      Resource Record Signature (RRSIG), Next Secure (NSEC), and
      (optionally) DS records] according to the rules in this section".
      There is an important note at the end of Section 5.2 of [RFC4035]
      that defines an additional situation in which a zone is considered
      unsigned: "If the resolver does not support any of the algorithms
      listed in an authenticated DS RRset, then the resolver will not be
      able to verify the authentication path to the child zone.  In this
      case, the resolver SHOULD treat the child zone as if it were
      unsigned."
   
   NSEC:  "The NSEC record allows a security-aware resolver to
      authenticate a negative reply for either name or type non-
      existence with the same mechanisms used to authenticate other DNS
      replies."  (Quoted from [RFC4033], Section 3.2.)  In short, an
      NSEC record provides authenticated denial of existence.
   
      "The NSEC resource record lists two separate things: the next
      owner name (in the canonical ordering of the zone) that contains
      authoritative data or a delegation point NS RRset, and the set of
      RR types present at the NSEC RR's owner name."  (Quoted from
      Section 4 of RFC 4034)
   
   NSEC3:  Like the NSEC record, the NSEC3 record also provides
      authenticated denial of existence; however, NSEC3 records mitigate
      against zone enumeration and support Opt-Out.  NSEC3 resource
      records are defined in [RFC5155].

Note that [RFC6840] says that [RFC5155] "is now considered part of the DNS Security Document Family as described by Section 10 of [RFC4033]". This means that some of the definitions from earlier RFCs that only talk about NSEC records should probably be considered to be talking about both NSEC and NSEC3.

   Opt-out:  "The Opt-Out Flag indicates whether this NSEC3 RR may cover
      unsigned delegations."  (Quoted from [RFC5155], Section 3.1.2.1.)
      Opt-out tackles the high costs of securing a delegation to an
      insecure zone.  When using Opt-Out, names that are an insecure
      delegation (and empty non-terminals that are only derived from
      insecure delegations) don't require an NSEC3 record or its
      corresponding RRSIG records.  Opt-Out NSEC3 records are not able
      to prove or deny the existence of the insecure delegations.
      (Adapted from [RFC7129], Section 5.1)
   
   Zone enumeration:  "The practice of discovering the full content of a
      zone via successive queries."  (Quoted from [RFC5155],
      Section 1.3.)  This is also sometimes called "zone walking".  Zone
      enumeration is different from zone content guessing where the
      guesser uses a large dictionary of possible labels and sends
      successive queries for them, or matches the contents of NSEC3
      records against such a dictionary.
   
   Key signing key (KSK):  DNSSEC keys that "only sign the apex DNSKEY
      RRset in a zone."(Quoted from [RFC6781], Section 3.1)
   
   Zone signing key (ZSK):  "DNSSEC keys that can be used to sign all
      the RRsets in a zone that require signatures, other than the apex
      DNSKEY RRset."  (Quoted from [RFC6781], Section 3.1) Note that the
      roles KSK and ZSK are not mutually exclusive: a single key can be
      both KSK and ZSK at the same time.  Also note that a ZSK is
      sometimes used to sign the apex DNSKEY RRset.
   
   Combined signing key (CSK):  "In cases where the differentiation
      between the KSK and ZSK is not made, i.e., where keys have the
      role of both KSK and ZSK, we talk about a Single-Type Signing
      Scheme."  (Quoted from [RFC6781], Section 3.1) This is sometimes
      called a "combined signing key" or CSK.  It is operational
      practice, not protocol, that determines whether a particular key
      is a ZSK, a KSK, or a CSK.
   
   Secure Entry Point (SEP):  A flag in the DNSKEY RDATA that "can be
      used to distinguish between keys that are intended to be used as
      the secure entry point into the zone when building chains of
      trust, i.e., they are (to be) pointed to by parental DS RRs or
      configured as a trust anchor.  Therefore, it is suggested that the
      SEP flag be set on keys that are used as KSKs and not on keys that
      are used as ZSKs, while in those cases where a distinction between
      a KSK and ZSK is not made (i.e., for a Single-Type Signing
      Scheme), it is suggested that the SEP flag be set on all keys."
      (Quoted from [RFC6781], Section 3.2.3.)  Note that the SEP flag is
      only a hint, and its presence or absence may not be used to
      disqualify a given DNSKEY RR from use as a KSK or ZSK during
      validation.
   
   DNSSEC Policy (DP):  A statement that "sets forth the security
      requirements and standards to be implemented for a DNSSEC-signed
      zone."  (Quoted from [RFC6841], Section 2)
   
   DNSSEC Practice Statement (DPS):  "A practices disclosure document
      that may support and be a supplemental document to the DNSSEC
      Policy (if such exists), and it states how the management of a
      given zone implements procedures and controls at a high level."
      (Quoted from [RFC6841], Section 2)

9. DNSSEC States

A validating resolver can determine that a response is in one of four states: secure, insecure, bogus, or indeterminate. These states are defined in [RFC4033] and [RFC4035], although the two definitions differ a bit. This document makes no effort to reconcile the two definitions, and takes no position as to whether they need to be reconciled.

Section 5 of [RFC4033] says:

A validating resolver can determine the following 4 states:

Secure: The validating resolver has a trust anchor, has a chain

of trust, and is able to verify all the signatures in the response.

Insecure: The validating resolver has a trust anchor, a chain

of trust, and, at some delegation point, signed proof of the non-existence of a DS record. This indicates that subsequent branches in the tree are provably insecure. A validating resolver may have a local policy to mark parts of the domain space as insecure.

Bogus: The validating resolver has a trust anchor and a secure

delegation indicating that subsidiary data is signed, but the response fails to validate for some reason: missing signatures, expired signatures, signatures with unsupported algorithms, data missing that the relevant NSEC RR says should be present, and so forth.

Indeterminate: There is no trust anchor that would indicate that a

specific portion of the tree is secure. This is the default operation mode.

Section 4.3 of [RFC4035] says:

A security-aware resolver must be able to distinguish between four cases:

Secure: An RRset for which the resolver is able to build a chain

of signed DNSKEY and DS RRs from a trusted security anchor to the RRset. In this case, the RRset should be signed and is subject to signature validation, as described above.

Insecure: An RRset for which the resolver knows that it has no

chain of signed DNSKEY and DS RRs from any trusted starting point to the RRset. This can occur when the target RRset lies in an unsigned zone or in a descendent [sic] of an unsigned zone. In this case, the RRset may or may not be signed, but the resolver will not be able to verify the signature.

Bogus: An RRset for which the resolver believes that it ought to

be able to establish a chain of trust but for which it is unable to do so, either due to signatures that for some reason fail to validate or due to missing data that the relevant DNSSEC RRs indicate should be present. This case may indicate an attack but may also indicate a configuration error or some form of data corruption.

Indeterminate: An RRset for which the resolver is not able to

determine whether the RRset should be signed, as the resolver is not able to obtain the necessary DNSSEC RRs. This can occur when the security-aware resolver is not able to contact security-aware name servers for the relevant zones.

10. Security Considerations

These definitions do not change any security considerations for the DNS.

11. References

11.1. Normative References

   [RFC882]   Mockapetris, P., "Domain names: Concepts and facilities",
              RFC 882, DOI 10.17487/RFC0882, November 1983,
              <http://www.rfc-editor.org/info/rfc882>.
   
   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
              STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
              <http://www.rfc-editor.org/info/rfc1034>.
   
   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
              November 1987, <http://www.rfc-editor.org/info/rfc1035>.
   
   [RFC1123]  Braden, R., Ed., "Requirements for Internet Hosts -
              Application and Support", STD 3, RFC 1123,
              DOI 10.17487/RFC1123, October 1989,
              <http://www.rfc-editor.org/info/rfc1123>.
   
   [RFC1996]  Vixie, P., "A Mechanism for Prompt Notification of Zone
              Changes (DNS NOTIFY)", RFC 1996, DOI 10.17487/RFC1996,
              August 1996, <http://www.rfc-editor.org/info/rfc1996>.
   
   [RFC2136]  Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound,
              "Dynamic Updates in the Domain Name System (DNS UPDATE)",
              RFC 2136, DOI 10.17487/RFC2136, April 1997,
              <http://www.rfc-editor.org/info/rfc2136>.
   
   [RFC2181]  Elz, R. and R. Bush, "Clarifications to the DNS
              Specification", RFC 2181, DOI 10.17487/RFC2181, July 1997,
              <http://www.rfc-editor.org/info/rfc2181>.
   
   [RFC2182]  Elz, R., Bush, R., Bradner, S., and M. Patton, "Selection
              and Operation of Secondary DNS Servers", BCP 16, RFC 2182,
              DOI 10.17487/RFC2182, July 1997,
              <http://www.rfc-editor.org/info/rfc2182>.
   
   [RFC2308]  Andrews, M., "Negative Caching of DNS Queries (DNS
              NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998,
              <http://www.rfc-editor.org/info/rfc2308>.
   
   [RFC4033]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "DNS Security Introduction and Requirements",
              RFC 4033, DOI 10.17487/RFC4033, March 2005,
              <http://www.rfc-editor.org/info/rfc4033>.
   
   [RFC4034]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "Resource Records for the DNS Security Extensions",
              RFC 4034, DOI 10.17487/RFC4034, March 2005,
              <http://www.rfc-editor.org/info/rfc4034>.
   
   [RFC4035]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "Protocol Modifications for the DNS Security
              Extensions", RFC 4035, DOI 10.17487/RFC4035, March 2005,
              <http://www.rfc-editor.org/info/rfc4035>.
   
   [RFC4592]  Lewis, E., "The Role of Wildcards in the Domain Name
              System", RFC 4592, DOI 10.17487/RFC4592, July 2006,
              <http://www.rfc-editor.org/info/rfc4592>.
   
   [RFC5155]  Laurie, B., Sisson, G., Arends, R., and D. Blacka, "DNS
              Security (DNSSEC) Hashed Authenticated Denial of
              Existence", RFC 5155, DOI 10.17487/RFC5155, March 2008,
              <http://www.rfc-editor.org/info/rfc5155>.
   
   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <http://www.rfc-editor.org/info/rfc5730>.
   
   [RFC5936]  Lewis, E. and A. Hoenes, Ed., "DNS Zone Transfer Protocol
              (AXFR)", RFC 5936, DOI 10.17487/RFC5936, June 2010,
              <http://www.rfc-editor.org/info/rfc5936>.
   
   [RFC6561]  Livingood, J., Mody, N., and M. O'Reirdan,
              "Recommendations for the Remediation of Bots in ISP
              Networks", RFC 6561, DOI 10.17487/RFC6561, March 2012,
              <http://www.rfc-editor.org/info/rfc6561>.
   
   [RFC6672]  Rose, S. and W. Wijngaards, "DNAME Redirection in the
              DNS", RFC 6672, DOI 10.17487/RFC6672, June 2012,
              <http://www.rfc-editor.org/info/rfc6672>.
   
   [RFC6781]  Kolkman, O., Mekking, W., and R. Gieben, "DNSSEC
              Operational Practices, Version 2", RFC 6781,
              DOI 10.17487/RFC6781, December 2012,
              <http://www.rfc-editor.org/info/rfc6781>.
   
   [RFC6840]  Weiler, S., Ed. and D. Blacka, Ed., "Clarifications and
              Implementation Notes for DNS Security (DNSSEC)", RFC 6840,
              DOI 10.17487/RFC6840, February 2013,
              <http://www.rfc-editor.org/info/rfc6840>.
   
   [RFC6841]  Ljunggren, F., Eklund Lowinder, AM., and T. Okubo, "A
              Framework for DNSSEC Policies and DNSSEC Practice
              Statements", RFC 6841, DOI 10.17487/RFC6841, January 2013,
              <http://www.rfc-editor.org/info/rfc6841>.
   
   [RFC6891]  Damas, J., Graff, M., and P. Vixie, "Extension Mechanisms
              for DNS (EDNS(0))", STD 75, RFC 6891,
              DOI 10.17487/RFC6891, April 2013,
              <http://www.rfc-editor.org/info/rfc6891>.
   
   [RFC7344]  Kumari, W., Gudmundsson, O., and G. Barwood, "Automating
              DNSSEC Delegation Trust Maintenance", RFC 7344,
              DOI 10.17487/RFC7344, September 2014,
              <http://www.rfc-editor.org/info/rfc7344>.

11.2. Informative References

   [DBOUND]   IETF, "Domain Boundaries (dbound) Working Group", 2015,
              <https://datatracker.ietf.org/wg/dbound/charter/>.
   
   [RFC819]   Su, Z. and J. Postel, "The Domain Naming Convention for
              Internet User Applications", RFC 819,
              DOI 10.17487/RFC0819, August 1982,
              <http://www.rfc-editor.org/info/rfc819>.
   
   [RFC952]   Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
              host table specification", RFC 952, DOI 10.17487/RFC0952,
              October 1985, <http://www.rfc-editor.org/info/rfc952>.
   
   [RFC1995]  Ohta, M., "Incremental Zone Transfer in DNS", RFC 1995,
              DOI 10.17487/RFC1995, August 1996,
              <http://www.rfc-editor.org/info/rfc1995>.
   
   [RFC3912]  Daigle, L., "WHOIS Protocol Specification", RFC 3912,
              DOI 10.17487/RFC3912, September 2004,
              <http://www.rfc-editor.org/info/rfc3912>.
   
   [RFC4641]  Kolkman, O. and R. Gieben, "DNSSEC Operational Practices",
              RFC 4641, DOI 10.17487/RFC4641, September 2006,
              <http://www.rfc-editor.org/info/rfc4641>.
   
   [RFC4697]  Larson, M. and P. Barber, "Observed DNS Resolution
              Misbehavior", BCP 123, RFC 4697, DOI 10.17487/RFC4697,
              October 2006, <http://www.rfc-editor.org/info/rfc4697>.
   
   [RFC4786]  Abley, J. and K. Lindqvist, "Operation of Anycast
              Services", BCP 126, RFC 4786, DOI 10.17487/RFC4786,
              December 2006, <http://www.rfc-editor.org/info/rfc4786>.
   
   [RFC4956]  Arends, R., Kosters, M., and D. Blacka, "DNS Security
              (DNSSEC) Opt-In", RFC 4956, DOI 10.17487/RFC4956, July
              2007, <http://www.rfc-editor.org/info/rfc4956>.
   
   [RFC5625]  Bellis, R., "DNS Proxy Implementation Guidelines",
              BCP 152, RFC 5625, DOI 10.17487/RFC5625, August 2009,
              <http://www.rfc-editor.org/info/rfc5625>.
   
   [RFC5890]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Definitions and Document Framework",
              RFC 5890, DOI 10.17487/RFC5890, August 2010,
              <http://www.rfc-editor.org/info/rfc5890>.
   
   [RFC5891]  Klensin, J., "Internationalized Domain Names in
              Applications (IDNA): Protocol", RFC 5891,
              DOI 10.17487/RFC5891, August 2010,
              <http://www.rfc-editor.org/info/rfc5891>.
   
   [RFC5892]  Faltstrom, P., Ed., "The Unicode Code Points and
              Internationalized Domain Names for Applications (IDNA)",
              RFC 5892, DOI 10.17487/RFC5892, August 2010,
              <http://www.rfc-editor.org/info/rfc5892>.
   
   [RFC5893]  Alvestrand, H., Ed. and C. Karp, "Right-to-Left Scripts
              for Internationalized Domain Names for Applications
              (IDNA)", RFC 5893, DOI 10.17487/RFC5893, August 2010,
              <http://www.rfc-editor.org/info/rfc5893>.
   
   [RFC5894]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Background, Explanation, and
              Rationale", RFC 5894, DOI 10.17487/RFC5894, August 2010,
              <http://www.rfc-editor.org/info/rfc5894>.
   
   [RFC6055]  Thaler, D., Klensin, J., and S. Cheshire, "IAB Thoughts on
              Encodings for Internationalized Domain Names", RFC 6055,
              DOI 10.17487/RFC6055, February 2011,
              <http://www.rfc-editor.org/info/rfc6055>.
   
   [RFC6265]  Barth, A., "HTTP State Management Mechanism", RFC 6265,
              DOI 10.17487/RFC6265, April 2011,
              <http://www.rfc-editor.org/info/rfc6265>.
   
   [RFC6365]  Hoffman, P. and J. Klensin, "Terminology Used in
              Internationalization in the IETF", BCP 166, RFC 6365,
              DOI 10.17487/RFC6365, September 2011,
              <http://www.rfc-editor.org/info/rfc6365>.
   
   [RFC7129]  Gieben, R. and W. Mekking, "Authenticated Denial of
              Existence in the DNS", RFC 7129, DOI 10.17487/RFC7129,
              February 2014, <http://www.rfc-editor.org/info/rfc7129>.
   
   [RFC7480]  Newton, A., Ellacott, B., and N. Kong, "HTTP Usage in the
              Registration Data Access Protocol (RDAP)", RFC 7480,
              DOI 10.17487/RFC7480, March 2015,
              <http://www.rfc-editor.org/info/rfc7480>.
   
   [RFC7481]  Hollenbeck, S. and N. Kong, "Security Services for the
              Registration Data Access Protocol (RDAP)", RFC 7481,
              DOI 10.17487/RFC7481, March 2015,
              <http://www.rfc-editor.org/info/rfc7481>.
   
   [RFC7482]  Newton, A. and S. Hollenbeck, "Registration Data Access
              Protocol (RDAP) Query Format", RFC 7482,
              DOI 10.17487/RFC7482, March 2015,
              <http://www.rfc-editor.org/info/rfc7482>.
   
   [RFC7483]  Newton, A. and S. Hollenbeck, "JSON Responses for the
              Registration Data Access Protocol (RDAP)", RFC 7483,
              DOI 10.17487/RFC7483, March 2015,
              <http://www.rfc-editor.org/info/rfc7483>.
   
   [RFC7484]  Blanchet, M., "Finding the Authoritative Registration Data
              (RDAP) Service", RFC 7484, DOI 10.17487/RFC7484, March
              2015, <http://www.rfc-editor.org/info/rfc7484>.
   
   [RFC7485]  Zhou, L., Kong, N., Shen, S., Sheng, S., and A. Servin,
              "Inventory and Analysis of WHOIS Registration Objects",
              RFC 7485, DOI 10.17487/RFC7485, March 2015,
              <http://www.rfc-editor.org/info/rfc7485>.

Acknowledgements

The authors gratefully acknowledge all of the authors of DNS-related RFCs that proceed this one. Comments from Tony Finch, Stephane Bortzmeyer, Niall O'Reilly, Colm MacCarthaigh, Ray Bellis, John Kristoff, Robert Edmonds, Paul Wouters, Shumon Huque, Paul Ebersman, David Lawrence, Matthijs Mekking, Casey Deccio, Bob Harold, Ed Lewis, John Klensin, David Black, and many others in the DNSOP Working Group have helped shape this document.

Authors' Addresses

Paul Hoffman
ICANN

   Email: paul.hoffman@icann.org
   
   Andrew Sullivan
   Dyn
   150 Dow Street, Tower 2
   Manchester, NH  03101
   United States

Email:

          asullivan@dyn.com
   
   Kazunori Fujiwara
   Japan Registry Services Co., Ltd.
   Chiyoda First Bldg. East 13F, 3-8-1 Nishi-Kanda
   Chiyoda-ku, Tokyo  101-0065
   Japan
   
   Phone: +81 3 5215 8451
   Email: fujiwara@jprs.co.jp